Omron F250-UME Software Manual page 44

Basic Operations
Note Switch camera only switches between the images saved to Image 0 and
1-6-1-3 Filtering
1-(36)
Image 1 from the image buffers. New images cannot be sent to the image buff-
ers using this processing item.
1. Select Select camera.
0.Camera image
A list of Camera numbers will be displayed.
Select camera
2. Select the number of the Camera to be used.
3. Press the ENT Key.
The setting will be registered and the screen in (1.) will return.
The image read by the Camera can be manipulated to create an image that is
easier to measure. Image filtering is set by using 3 functions: Filtering Order,
Filtering, and BGS Levels.
The Controller has two image memories, and Filtering, BGS Levels, and Filter-
ing Order can be set for each.
This section gives an outline only. Refer to 2-1 Inputting Camera Images for
details on filtering.
Camera settings
Select camera
Filtering order(Image0)
Filtering(Image0)
BGS levels(Image0)
Filtering order(Image1)
Filtering(Image1)
BGS levels(Image1)
Frame/Field
Camera 0
Camera 1
Camera 2
Camera 3
0.Camera image
Camera settings
Select camera
Filtering order(Image0)
Filtering(Image0)
BGS levels(Image0)
Filtering order(Image1)
Filtering(Image1)
BGS levels(Image1)
Frame/Field
Section 1-6