Omron F250-UME Software Manual page 360

EC Defect
CHECK
HELP
2-15-(27)
The screen for setting the angle of the arrow will be displayed.
Direction
6. Align the arrow with the angle of the line.
Down/Right Keys:
Up/Left Keys:
The line will not be extracted correctly if the arrow is rotated so that it is the
reverse of the arrow direction shown in step 3. Press the TRIG Key to re-
turn the arrow to the correct direction if the arrow direction has become un-
clear.
Arrow directions (edge codes) and angles: See page 2-15-(27).
7. Press the ENT Key.
The screen for setting the permissible range will be displayed.
Direction
8. Set the permissible angle range. The maximum setting is 45 .
Up/Left Keys:
Down/Right Keys:
9. Press the ENT Key.
The settings will be registered and the screen in (1.) will return.
Angle:180
Move the arrow clockwise.
Move the arrow counterclockwise.
Example
Latitude angle: 15
Increase the range.
Decrease the range.
Section 2-15