Omron F250-UME Software Manual page 239

Scroll
2-11-1 Setting the Reference
2.Scroll
:
Measure X
:
Measure Y
:
Measure
:
Reference X
:
Reference Y
:
Reference
Judgement conditions
Set expressions to specify the units and measured values to be used as the
reference for scrolling.
Image scrolled in X direction for difference between reference X and value of this expression.
Image scrolled in Y direction for difference between reference Y and value of this expression.
Image scrolled rotationally for difference between reference
Value of this expression is reference position for scrolling in X direction.
Value of this expression is reference position for scrolling in Y direction.
Value of this expression is reference position for scrolling rotationally.
Example: Scrolling Using Labeling in Unit 1 as the Reference
2.Scroll
Measure X
Measure Y
Measure
Reference X
Reference Y
Reference
Judgement conditions
Label 0 (largest area)
0.
Camera image
1.
Labeling
2.
: Gravity X of Unit 1
:
Gravity Y of Unit 1
:
Reference X of Unit 1
:
:
Reference Y of Unit 1
:
Noise
Areas are assigned label
numbers in descending order of
area. Label 0 is set for output.
Scroll
Scrolling is performed
using the center of gravity
X and Y of label 0.
Section 2-11
q
and value of this expression.
2-11-(3)