Testing Measurements; Entering Monitor Mode - Omron F250-UME Software Manual

Testing Measurements

3-1 Testing Measurements
3-1-1

Entering Monitor Mode

CHECK
Entering Monitor Mode from Set Mode
Entering Monitor Mode from Run Mode
3-(2)
Use the following procedure to check that measurements are being correctly
performed with the set measurement conditions.
The key allocations for the Console Keys used to make input can be changed.
In the following explanations, it is assumed that the key allocations are at the
default settings. If they are not, adapt the procedure accordingly. Refer to
1. Display the Set Mode Screen.
0.Scn 0=SET=
0.Camera image
1.Fine matching
2.
ENT:Set SFT+ESC:Edit
2. Press the ESC Key to leave Set Mode and enter Monitor Mode automati-
cally.
0.Scn 0
1. Move the cursor to RUN and press the ENT Key. The mode selections will
be displayed.
0.Scn 0
2. Select MON to enter Monitor Mode.
.
---- ---ms
MON
Image 0 freeze
OK 67ms
RUN
SET
MON
RUN
SYS
TOOL
SAVE
Image 0 freeze
Section 3-1