Inputting Values - Omron F250-UME Software Manual

Menu Operations
1-5-5

Inputting Values

1-(26)
This section explains how to input values when setting measurement condi-
tions or communications specifications.
1. Move the cursor to the item for which a value is to be changed.
Judgement conditions
Area : 2035.000
[ 2000.000 : 247808.000]
Gravity X : 180.000
[ 0.000 : 511.000]
Gravity Y : 250.000
[ 0.000 : 483.000]
End
2. Press the ENT Key.
The cursor will change to a cursor the size of a single digit.
Judgement conditions
Area : 2035.000
[ 2000.000 : 0247808.000]
Gravity X : 180.000
[ 0.000 :
Gravity Y : 250.000
[ 0.000 :
End
3. Move the cursor to the digit to be changed.
Use the Left and Right Keys to move the cursor.
4. Change the value.
Use the Up Key to increase the value.
Use the Down Key to decrease the value.
Judgement conditions
Area : 2035.000
[ 2000.000 : 0047808.000]
Gravity X : 180.000
[ 0.000 : 511.000]
Gravity Y : 250.000
5. Repeat these steps to change other values.
6. Press the ENT Key.
The values will be set.
Judgement conditions
Area : 2035.000
[ 2000.000 :
Gravity X : 180.000
[ 0.000 : 511.000]
Gravity Y : 250.000
[ 0.000 : 483.000]
End
511.000]
483.000]
0
25000.000]
Section 1-5