Omron F250-UME Software Manual page 589

Labeling
2-25-3 Setting Measurement Conditions
The asterisk (*) indicates the default setting.
Measurement conditions
Area
[ 0.000 :
Outside trimming :
Filling up holes
Sort
Area descending order
Label No.
End
Conditions for reassigning label numbers
Area descending order:*
Area ascending:
X coordinate descending:
X coordinate ascending:
Y coordinate descending:
Y coordinate ascending:
Note When X and Y center of gravity are sorted, the upper left corner of the measurement region
is the origin.
0
Y
Sort example:
Labeling result
CHECK
CHECK
Set the Area, Sort, and Label No. as conditions for label measurement.
Change the other settings as well when necessary.
Area range for labels (0 to 9,999,999.999 (0*))
:
247808.000 ]
OFF
: OFF
:
: [ 0]
Label No. for data output (0 to 2,499 (0*))
Sorts in descending order by area.
Sorts in ascending order by area.
Sorts in descending order by center of gravity X coordinate. (See note.)
Sorts in ascending order by center of gravity X coordinate. (See note.)
Sorts in descending order by center of gravity Y coordinate. (See note.)
Sorts in ascending order by center of gravity Y coordinate. (See note.)
X
Label numbers in
descending order
by area
1 2
The coordinates set using calibration are not affected by labeling.
When Position compensation is set, the sort is performed on center of gravity
coordinates after position compensation.
1. Select Measurement conditions.
Output conditions for measurement value:
OFF*: Measures the binary image.
ON: Measures all pixels outside the
measurement region as white pixels.
Output conditions for measurement value:
OFF*: Outputs area and center of gravity
coordinates before filling holes.
ON: Outputs area and center of gravity
coordinates after filling holes.
Label numbers in
ascending order by
X center of gravity
0
0 1 2
Measurement image
Binary
Measurement conditions
Region
Reference registration
Judgement conditions
Coordinate mode
Section 2-25
Label numbers in
descending order by
Y center of gravity
2
1
0
2-25-(6)