Omron F250-UME Software Manual page 205

Circle Position Compensation
Operational Flow
For no rotation, see page 2-9-(4)
1
page 2-9-(3)
1
Set the position
Register
displacement
the model.
compensation
region.
For 1 model, refer to page 2-9-(9).
1
Set the
measure-
ment condi-
tions.
For circular and arc defects, refer to page 2-9-(13).
1
Set the
measure-
ment condi-
tions.
For circular angles, refer to page 2-9-(19).
1
Set the
measure-
ment condi-
tions.
2
(As required) page 2-9-(28)
Set the
detailed
conditions.
3
page 2-9-(30)
Reference
the model.
4
page 2-9-(31)
Measure-
ment
screens
CHECK
2
Set the
search
region.
2
Register
the model.
2
Register
the model.
2
Register
the model.
Circle position compensation uses the image stored at Image 0 as the mea-
surement image; there is no menu for selecting the measurement image.
The results of the position displacement compensation (scrolling) are exe-
cuted for both Image 0 and Image 1.
3
Set the
judgement
conditions.
3 4
Set the Set the
search judgement
region. conditions.
3
4
Set the Set the
search judgement
region. conditions.
4
3
Set the Set the
search judgement
region. conditions.
Section 2-9
(As required)
5
Set the
detailed
judgement
conditions.
(As required)
5
Set the
detailed
judgement
conditions.
2-9-(2)