Table of Contents
Advertisement
Classification
CHECK
Correcting or Clearing Figures
2-13-1-1
Deleting Models
To add models to the same index number, use the Right Key to move the cur-
sor.
Model registration
16. When all models have been registered, press the ESC Key.
The settings will be registered and the screen in (1.) will return.
1.
In the screen for step 8 above, select the figure to be changed or cleared
using the Up and Down Keys and press the ENT Key.
Model registration
The figure for the figure number selected using the cursor will be displayed
with solid lines. The selections Correct and Clear will be displayed.
2.
Select either Correct or Clear and press the ENT Key.
If Correct is selected, the cursor will be displayed. Correct the size and po-
sition of the figure as desired.
If Clear is selected, the selected figure will be cleared.
Use this operation to delete registered models.
1.
Select the model to be deleted from among the thumbnails and press the
ENT Key.
Model registration
0
A A
1
B
B
2
C C C
3
4
5
6
7
SFT+
ESC:End SFT+ESC:Input image
0
A
1
2
3
Figure 0
Figure 1
Add
Figure0
Figure1
A A
End
Correct
Clear
A
A
B
B
:Switch
Section 2-13
Cursor
Cursor
2-13-(6)
Advertisement
Chapters
Table of Contents
