Omron F250-UME Software Manual page 934

Normal Serial Interface
Note Mask figures cannot be registered.
6-2-(84)
ECM Search (Settings Data)
Data
Settings 16 Measurement image
data
0: Image 0
1: Image 1
17 Coordinate mode
0: After scroll, calibration OFF
1: Before scroll, calibration OFF
2: After scroll, calibration ON
3: Before scroll, calibration ON
18 Edge extraction mask size
0: 3
1: 5
19 Edge extraction lower limit (10 to 255)
20 Edge extraction upper limit (10 to 255)
21 Black/white reverse
0: OFF
1: ON
22 Accuracy
0: Normal
1: Precise
23 Model region X 1 (0 to 511) (See note.)
24 Model region Y 1 (0 to 483) (See note.)
25 Model region X 2 (0 to 511) (See note.)
26 Model region Y 2 (0 to 483) (See note.)
27 Reference X (0 to 511)
28 Reference Y (0 to 483)
29 Search region X 1 (0 to 511)
30 Search region Y 1 (0 to 483)
31 Search region X 2 (0 to 511)
32 Search region Y 2 (0 to 483)
33 Correlation judgement upper limit (0 to 100)
34 Correlation judgement lower limit (0 to 100)
35 X judgement upper limit (-9,999.999 to 9,999.999)
36 X judgement lower limit (-9,999.999 to 9,999.999)
37 Y judgement upper limit (-9,999.999 to 9,999.999)
38 Y judgement lower limit (-9,999.999 to 9,999.999)
39 Candidate level (0 to 99)
40 Reduction ratio (25 to 100)
41 Model skipping (0 to 9)
42 Search skipping (0 to 9)
43 Matching edges display
0: OFF
1: ON
Details
™
3
™
5
Section 6-2