Omron F250-UME Software Manual page 354

EC Defect
SeeAlso
SeeAlso
STEP 2: Changing Line Extracting Conditions
Example
2-15-(21)
Refer to page 2-15-(11).
New registration (Removal R1)
2. Select Line.
The initial screen for lines will be displayed.
3. Select Removal region.
The Removal Region Settings Screen will be displayed.
Removal region
The rest of the procedure is the same as for circles.
Refer to page 2-15-(13).
The level for line extracting can be changed. There are 5 levels, 1 to 5. The
default setting is 3. Adjust the level as required.
To detect this kind of small defect as a defect
To detect this kind of uneven edge as a line and remove it.
Circle
Line
Oriented line
Removal region
Extracting level
Clear
New
End Box
Ellipse
O R
Circle
N O T
Circumference
Polygon
Reduce the line extracting level.
Increase the line extracting level.
Section 2-15