Omron F250-UME Software Manual page 962

Host Link Serial Interface
6-3-(6)
The System settings menu will be displayed.
System settings
3. Select Communications.
The communications menu will be displayed.
System settings
4. Select Serial.
The Communications (Serial) window will be displayed.
Communications(Serial)
5. Set each parameter to the desired setting.
Camera settings
Communication
Display
Operation settings
Measurement control
Startup mode
Date/Time
System information
Camera settings
Communication
Serial
Display
Normal
Operation settings
Host link
Measurement control
Parallel
Startup mode
Ethernet
Date/Time
System information
:
Interface
RS-232C
:
Baud rate
38400bps
:
Data length
:
Parity bits None
:
Stop bits
:
Mode
Host link
:
Protocol XMODEM
End
Section 6-3
8bit
1bit