Omron F250-UME Software Manual page 329

Density Defects
SeeAlso
2-14-2-4 Clearing Set Regions
Refer to page 2-14-(12) for information on elements.
1. Select Judgement conditions.
Region0(Defect(Deviation))
The Judgement Conditions Settings Screen will be displayed.
Judgement conditions
Density deviation : 64 [127]
Measurement result for the displayed image.
:
Use as reference for setting conditions.
2. Set a density deviation value.
3. Select End.
The settings will be registered and the screen in (1.) will return.
The clear operation is performed separately for each region.
1. Select the number of the region to be cleared.
Select region
A list of selections will be displayed.
Example: Clearing region for Defect (line) measurement
Inspected region
Reference registration
Judgement conditions
Clear
End
Region0
Region1
Region2
Region3
Region4
Region5
Region6
Region7
Measurement conditions
Inspected region
Reference registration
Judgement conditions
Detailed conditions
Clear
Section 2-14
2-14-(31)