Omron F250-UME Software Manual page 534

ECM Search
2-23-3 Setting Measurement Conditions
2-23-(7)
Set the conditions for searching for the model.
Measurement conditions
Reverse :
Accuracy :
Normal
End
Normal*: Finds the measurement value in integers (pixel units).
Precise: Finds the measurement value in decimals (sub-pixel units).
The asterisk (*) indicates the default setting.
1. Select Measurement conditions.
1.ECM search
The Measurement Conditions Settings Screen will be displayed.
Measurement conditions
2. Make the reverse and accuracy settings.
3. Select End.
The settings will be registered and the screen in (1.) will return.
OFF*: Searches for the registered
OFF
model. The search is not performed if
black and white are reversed.
ON: Performs the search even if black
and white are reversed for the model.
Measurement image
Extract edges
Measurement conditions
Model registration
Search coordinate
Search region
Judgement conditions
Detailed conditions
Coordinate mode
Reverse :
OFF
Accuracy : Normal
End
Section 2-23