Omron F250-UME Software Manual page 420

EC Positioning
2-16-5 Measurement Screens
SeeAlso
CHECK
Judgement Result
Detailed Display
2-16-(37)
Detailed measurement values can be displayed on the screen in Monitor and
Run modes. These values are useful when adjusting measurement conditions.
This section describes what kind of information can be displayed for EC posi-
tioning.
Refer to
Run modes.
Press the SHIFT+ESC Keys on the Run Screen to access the following screen
and change Display results to Details.
0.Scn 0
Press the Up or Down Key to change to the unit for which EC positioning is set
and the following detailed screens will be displayed.
Press the SHIFT+Right or Left Keys to switch in order between the three
screens.
0.Scn 0 RUN
1.EC position
0
Judge : OK
The measurement values for each region will be displayed.
0.Scn 0 RUN
1.EC position
X
0. 1234.567
1.
2.
3.
4.
5.
6.
7.
RUN
Image status
:
Freeze(Before scroll)
Display image
: Image0
Image size
: All
Display results
: Details
End
OK 45ms
Region number
Search region
Output coordinates
OK 45ms
Y
234.689 209.256
Section 2-16
for details on Monitor and
Region number