Omron F250-UME Software Manual page 137

Binary Position Compensation
2-5-4 Measurement Screens
SeeAlso
CHECK
Scroll Amount
Detailed Display
Detailed measurement values can be displayed on the screen in Monitor and
Run modes. These values are useful when adjusting measurement conditions.
This section describes what kind of information can be displayed for binary
position displacement compensation.
Refer to
Run modes.
Press the SHIFT+ESC Keys on the Run Screen to access the following screen
and change Display results to Details.
0.Scn 0
Use the Up or Down Key to change to the unit for which binary position com-
pensation is set and the following detailed screens will be displayed.
Use the SHIFT+Right or Left Keys to switch in order between the three
screens.
0.Scn 0
1.Binary pos. comp
Judge:OK
ScrollX:256.321
ScrollY:269.213
Scroll : 20.0
The measurement values for each region will be displayed.
0.Scn 0
Area :
Grav. X:
Grav. Y:
RUN
Image status
:
Freeze(Before scroll)
Display image
: Image0
Image size
:
Display results
: Details
End
RUN
RUN
1.Binary pos. comp
Region 0
1356.222
256.321
269.213
Section 2-5
for details on Monitor and
All
OK 45ms
OK 45ms
Region1
2-5-(18)