Omron F250-UME Software Manual page 747

Display Line, Display Box, Display Circle, and Display Cursor
SeeAlso
2. Place the cursor in the square brackets for 1st point X and press the ENT
Key.
The setting items will be displayed.
1st point X
ENT:Select
3. Select the item to be set and set the expression.
Refer to
4. Once the expression has been set, select OK.
The expression will be registered and the screen in (1.) will return.
1st point X
Measurement :
ENT:Change
5. Press the ESC Key.
The settings will be registered and the screen in (1.) will return.
Repeat the above steps to set the 1st point Y, 2nd point X, and 2nd point Y.
Unit ABS SIN
MOD COS
MAX ANGL
MIN ATAN
SQRT DIST
Const
DEL BS
.
256
256.000
Section 2-49
AND
OR
NOT
OK
2-49-(4)