Edge Position Compensation
2-7-1
Selecting Measurement Images
2-7-(2)
This section describes how to select an image stored at either Image 0 or
Image 1 as the image for measurement.
1.
Select Edge pos. comp.
0.Scn 0=SET=
ENT:Set SFT+ESC:Edit
The initial Edge Position Compensation Screen will be displayed.
2.
Select Measurement image.
The selections will be displayed.
Measurement image
3.
Select which image will be used for measurement, the image stored at Im-
age 0 or the image stored at Image 1.
4.
Press the ENT Key.
The settings will be registered and the screen in (1.) will return.
0.Camera image
1.Edge pos. comp
2.
Measurement image
Position compensation 0
Position compensation 1
Direction
Image0
Image1
Section 2-7