Omron F250-UME Software Manual page 629

Calculation
Clearing Expressions
List of Items
Note 1
Unit
Const
Moves the cursor.
Numerals between 0 and 9,999,999.999 can be set.
Note
CHECK
1. Use the Up and Down Keys to select the number of the expression to be
cleared from the calculation settings list then press the SHIFT + ESC Keys.
4.Calculation
The selections will be displayed.
2. Select Clear.
A confirmation message will be displayed.
3. Select Execute.
The expression will be cleared and the screen in (1.) will return.
Note 2 Note 3
ABS SIN AND
MOD COS OR
MAX ANGL NOT
MIN ATAN
SQRT DIST
DEL BS OK
1. Unit
Calculations can be performed using the measurement results for the units
set to the scene currently displayed.
If this item is selected, the unit numbers and processing item names will be
displayed. Select the unit number and then select the measurement item
to be used in the calculation from the submenu that is displayed.
The submenus differ depending on the selected unit. Refer to page 2-29-
(9).
Conditions
0 . U2.R00X-U2.R01X
1 .
2 .
3 .
4 .
5 .
6 .
7 .
SFT+ESC:Edit
Copy
Clear
Expression will be cleared.
Execute Cancel
Sets the expression.
Deletes the items.
DEL: Deletes the item to the right of the cursor.
BS: Deletes the item to the left of the cursor.
Section 2-29
2-29-(7)