Table of Contents
Advertisement
Edge Position Compensation
2-7-3
Setting Displacement Direction
2-7-(10)
The direction function is used to select which region's measurement results
will be used as the basis for position displacement compensation in the X, Y,
and
(rotation) directions
Position
compensation 0
Position compensation 1
1.
Select Direction.
1.Edge pos. comp
The Direction Settings Screen will be displayed.
Direction
2.
Set the conditions.
3.
Select End.
The settings will be registered and the screen in (1.) will return.
Measurement image
Position compensation 0
Position compensation 1
Direction
Direction X
:
Region 0
Direction Y
:
Region 1
Direction
:
None
End
Section 2-7
Direction X
:
Region 0
Direction Y
:
Region 1
Direction
:
None
End
Advertisement
Chapters
Table of Contents
