Performing Measurement - Omron F250-UME Software Manual

Starting Measurement
3-2-2

Performing Measurement

Note A through display requires longer measurement time than a freeze display.
CHECK
SeeAlso
CHECK
3-(6)
Use the following procedure to execute measurement according to the condi-
tions set for the scene currently displayed. The measurement results will be
output to external devices as well.
Press the TRIG Key on the Console or input the measurement command from
an external device.
Overall judgement
0.Scn 0
• Frame: 16.7 ms max.
• Field: 8.3 ms max.
Measurement will be executed and the measurement results will be displayed
on the screen.
The key operations are the same as for Monitor Mode.
Refer to
The lighting will become progressively darker if used for long periods. Make
periodic adjustments to the judgement conditions. When Intelligent Lighting is
used, the lighting will lose approximately 20% illumination after 1,500 hours of
use.
Measurement time (see note)
RUN OK 67ms
Image 0 freeze
for details.
Section 3-2