Menu Operations; Input Devices - Omron F250-UME Software Manual

Menu Operations

1-5 Menu Operations
1-5-1

Input Devices

F160-KP Console
SHIFT Key
SHIFT
ESC (escape) Key
ESC
ESC
F1
F4
F7
Function Keys
F1 to
F9
CHECK
1-(12)
Menu operations are performed from either the Console or the serial interface.
ENT (enter) Key
ENT
Up, Down, Left, and
Right Keys (Press left,
SHIFT
right, up, or down.)
ENT
TRIG
F3
TRIG (trigger) Key
F2
TRIG
F6
F5
F9
F8
Key
ESC: Escape Key Returns the user to the previous menu display or operation.
TRIG: Trigger Key Starts object measurement.
ENT: Enter Key Executes a function or sets a value.
Note: On the F160-KP, also functions as a Cursor Key.
SHIFT Key Must be pressed in combination with another key to have any
effect. Specific functions are assigned to combinations of the
SHIFT Key and other keys for specific screens.
Up, Down, Left, The Up and Down Keys are used to move the cursor up and down
and Right Keys and also to set values. The Up Key will increase a value by 1 and
the Down Key will decrease a value by 1. Hold down the Up or
Down Key to quickly increase or decrease a value.
The Left and Right Keys are used to move the cursor left or right.
Function Keys Functions can be assigned to function keys F1 to F8. Refer to 5-
4-1 Changing Console Key Allocations.
The display can be captured using F9. Refer to 5-4-2 Capturing
and Saving Images.
Menu operations can be performed from a personal computer via a serial
interface. Refer to 6-4 Serial Interface Menu Operations.
F150-KP Console
ESC (escape) Key
ESC
ESC
SHIFT
SHIFT Key
SHIFT
Function
Section 1-5
TRIG (trigger) Key
TRIG
ENT (enter) Key
TRIG ENT
ENT
Up, Down, Left, and
Right Keys
F150-KP
CONSOLE