Rotation Positioning
CHECK
The registration selections will be displayed.
Search coordinate
2.
Select Gravity.
The Binary Level Settings Screen will be displayed.
Binary level
:Move
Auto
The Controller automatically
determines binary level.
3.
Move the cursor to the upper limit and use the Left and Right Keys to
change the value.
Right Key:
SHIFT+Right Keys: Increases the value 10 times faster.
Left Key:
SHIFT+Left Keys:
Up and Down Keys: Switches between setting items.
4.
Use the same method to change the lower value.
Set the upper and lower limits to make the measurement object white pix-
els.
5.
Select OK.
The search coordinates will be registered and the screen in (1.) will return.
A display cursor will appear at the center of gravity (search coordinates).
Manual
Gravity
Edge
Lower limit
Upper[255]
Lower[128]
Reverse
:Change
Increases the lowest digit by one.
Decreases the lowest digit by one.
Decreases the value 10 times faster.
Binary level
:Move
:Change
Section 2-22
Upper limit
Auto
OK
Reverse
Reverses black
and white display
Upper[255]
Lower[128]
Reverse
Auto
OK
2-22-(10)