Omron F250-UME Software Manual page 292

Classification
2-13-3 Setting Judgement Conditions
Judgement conditions
Correlation :
Position X :
[ 0.000 :
Position Y : 250.000
[ 0.000 :
: Measurement results for the displayed image
Use these values as a reference for setting upper and lower limits.
CHECK
CHECK
2-13-(9)
Set the judgement conditions for the correlation between the measurement
object and the models and the position (X, Y) where the object was detected.
79 [ 60 : 100 ]
180.000
511.000]
483.000]
End
Correlation
When OK condition for correlation is set between 60 and 100:
Image 0
Correlation: 96
Judgement: OK
Position X and Position Y
Movement range in X direction
1. Select Judgement conditions.
1.Classification
Range for an OK judgement
Correlation range (0 to 100)
Range of movement of the measurement object
in the X direction (-9,999.999 to 9,999.999)
Range of movement of the measurement object
in the Y direction (-9,999.999 to 9,999.999)
Image 1 Image 2
55 50
NG NG
A
Movement range in Y direction
A
OK NG
Model registration
Search region
Judgement conditions
Detailed conditions
Coordinate mode
Section 2-13
Image 3
65
OK