Table of Contents
Advertisement
Density Defects
STEP 2: Drawing the Measurement Region
2-14-(16)
The initial Defect (var. box) screen will be displayed.
Region0(Defect(var.box))
Measurement conditions
Left edge
Upper edge
Right edge
Lower edge
Reference registration
Judgement conditions
Detailed conditions
Clear
5.
Select Measurement conditions.
The Measurement Conditions Settings Screen will be displayed.
Measurement conditions
6.
Make the settings.
7.
Select End.
The settings will be registered and the screen in (4.) will return.
The measurement region is drawn by specifying the upper, lower, left, and
right edges of the measurement object. If even one of the edges cannot be
located, the judgement result will be NG.
Left edge
When one of the edges is selected, the settings for the conditions for the
selected edge will be displayed. In this example, the settings for the left edge
will be explained. Make adjustments as necessary when setting conditions for
the upper, lower, and right edges.
Direction
:
Box
Large defect
:
ON
Small defect
:
ON
Small defect color
:
Both
Density
:
ON
End
Upper edge
Lower edge
Section 2-14
Measurement
Right edge
Advertisement
Chapters
Table of Contents
