Omron F250-UME Software Manual page 405

EC Positioning
2-16-3-3 Boxes
STEP 1: Setting Measurement Conditions
Measurement conditions
Box color
Result coordinate
Center
Defined side for
The angle of one side of the box can be output as a measurement result.
Select which side the angle will be obtained from.
All*
(Long axis)
The Controller will search for the cross point in the displayed image that
matches the conditions and a display cursor will appear at that position.
Reference registration
ENT:Set
2. Press the Up/Down and Right/Left Keys to move the cursor to change the
position.
3. Press the ENT Key to save the setting.
The setting will be registered and the screen in (1.) will return.
2 (As required)
1
Set mea- Set
surement conditions for
conditions. obtaining
lines.
Set the conditions to search for the positioning mark.
:
Black
:
: All
End
Upper Lower Left
The asterisk (*) indicates the default setting.
1. Display the figure selections using the same procedure as outlined in steps
1 to 3 for Circle.
Search region
248,152
:Move
3
Set search
region.
Select whether the color of the positioning
mark will be white or black compared to the
background. (Black*, white)
Select which position coordinates will be obtained.
Center* Upper Lower
left left
Right
Section 2-16
Reference position
(As required)
4
5
Register the Register the
box size. reference
position.
Upper Lower
right right
2-16-(22)