Table of Contents
Advertisement
Conditional Branching
2-35-3
Selecting the Branch Destination Unit Numbers
CHECK
CHECK
SeeAlso
2-35-(7)
Select the numbers of the branching destination units. Select a destination unit
for both YES and NO results (for when the comparative calculation results are
true and false).
1.
Select Yes
(End processing).
2.Branch
The list of units for the current scene will be displayed.
YES
2.
Select the branch destination unit and press the ENT Key.
Up/Down Keys: Scroll through the unit numbers.
Set a unit number after the Branch unit number. If an earlier unit number is
set, the processing may continue in a loop.
The settings will be registered.
2.Branch
3.
Set the No
(End processing) destination unit in the same way.
Always register End as the last of the processing items for the branch des-
tination units for both Yes
ed.
Refer to
Exp.A : U1. IN
Exp.B : 0
Conditions :A=B
YES
(End processing)
NO
(End processing)
(End processing)
0.Camera image
1.Classification
2.Branch
3.Edge position
4.DO judge
5.End
6.Pattern
Exp.A :
Exp.B :
Conditions :A=B
YES
3.Edge position
NO
(End processing)
and No
to indicate that the branch has end-
.
Section 2-35
Advertisement
Chapters
Table of Contents
