Host Link Data - Omron F250-UME Software Manual

Host Link Data

2-41 Host Link Data
The Host Link Data processing item is used to output data to Programmable
Controllers and other external devices via a serial interface.
Measurement values and calculations results can be output.
Programmable Controller
or other external device
Data is output only when measurement is performed in Run Mode. Data will
not be output if measurement is executed in Monitor Mode. The overall judge-
ment for the set processing items will be output to the parallel interface OR
signal, regardless of whether or not the Host Link Data processing item is set.
Section 2-41
Serial interface
2-41-(1)