Table of Contents
Advertisement
Rotation Positioning
2-22-2
Setting Measurement Regions
STEP 1: Registering a Model
HELP
CHECK
2-22-(5)
Up to 8 measurement regions can be set.
1
Register
model.
The area of the image to be inspected is registered as a model.
When a model is registered, that orientation becomes 0
tion of the model is registered as the search coordinates. When several figures
have been combined in the drawing, the center coordinates of the circumscrib-
ing rectangle become the search coordinates.
Refer to
Models can be created by combining up to 3 different figures. Regions with dif-
ficult shapes can be drawn and sections not to be measured can be left out of
the region by combining different figures.
1.
Select Rotate position.
The settings selections will be displayed.
1.Rotate position
2.
Select Select region.
The region numbers will be displayed.
Select region
2
(As required)
3
Change
Set search
search
region.
coordinates.
for information on models.
0.Scn 0=SET=
0.Camera image
1.Rotate position
2.
Measurement conditions
Select region
Detailed conditions
A
Coordinate mode
Region0
Region1
Region2
Region3
Region4
Region5
Region6
Region7
Section 2-22
4
Set
judgement
conditions.
°
and the center posi-
Advertisement
Chapters
Table of Contents
