Omron F250-UME Software Manual page 509

Rotation Positioning
SeeAlso
Refer to
ing the coordinate system.
1. Select Rotate position.
0.Scn 0=SET=
ENT:Set SFT+ESC:Edit
The settings selections will be displayed.
1.Rotate position
2. Select Measurement conditions.
The Measurement Conditions Settings Screen will be displayed.
Measurement conditions
3. Change the settings.
4. Select End.
The settings will be registered and the screen in (1.) will return.
for information on checking and chang-
0.Camera image
1.Rotate position
2.
Measurement conditions
Select region
Detailed conditions
A
Coordinate mode
Rotation range :
Skipping angle :
Accuracy : Normal
End
Section 2-22
None
5
2-22-(4)