Table of Contents
Advertisement
Calculation
2-29-1
Select Reflection in Overall Judgement
CHECK
SeeAlso
2-29-(2)
It is possible to select whether or not the judgement result of the calculation
will be reflected in the overall judgement output on the parallel interface OR
signal.
The overall judgement is also displayed on the Monitor and Measurement
Screens.
The overall judgement can be set to not be displayed also by using the display
settings function.
Refer to
1.
Select Calculation.
The list of set expressions will be displayed.
4.Calculation
2.
Select Conditions.
The Conditions Settings Screen will be displayed.
Conditions
3.
Change the setting.
4.
Select End.
The setting will be registered and the screen in (1.) will return.
.
0.Scn 0
MON
0.Scn 0=SET=
0.Camera image
1.Binary pos. comp
2.Edge position
3.Edge position
4.Calculation
5.
Conditions
0 .
1 .
2 .
3 .
4 .
Reflect in overall judge : OFF
End
Section 2-29
OK 67ms
Advertisement
Chapters
Table of Contents
