Omron F250-UME Software Manual page 326

Density Defects
2-14-(28)
A list of measurement methods will be displayed.
4. Select Defect (Deviation).
The initial Defect (Deviation) Screen will be displayed.
Region0(Defect(Deviation))
5. Select Inspected region.
The selections will be displayed.
Inspected region
Box
Circle proximity
6. Select Box or Circle proximity.
In this example, Circle proximity is selected.
The Inspected Region Settings Screen will be displayed.
Inspected region
New registration(Region0)
Defect(Line)
Defect(Circum)
Defect(Arc)
Defect(Region)
Defect(var.box)
Defect(Deviation)
Inspected region
Reference registration
Judgement conditions
Clear
New
End
Section 2-14