Changing Character Or Figure Colors - Omron F250-UME Software Manual

Screen Display and Monitor
5-3-4

Changing Character or Figure Colors

SeeAlso
Normal and Background Colors
OK and NG Colors
0.Scn 0 MON
1.Fine matching
Judge :OK
Quantity : 0
Area : 0
Gravity X :0.000
Gravity Y :0.000
OK color
Figure Colors 0 to 6
The color for characters or added figures can be set. Change the color when it
is difficult to see the character or figure on the image. The display color set
here, however, will be reflected in all scenes.
For color monitors, select white, black, red, green, blue, yellow, or original. (A
combination of up to any 7 colors can be set.)
For monochrome monitors, select white or black.
Refer to page 5-(15) for information on creating original colors.
The positions where color can be changed are described below.
Messages displayed on the screen will be appear in the color set under Nor-
mal. Menu boxes will shaded in the color set under Background.
0.Camera image
Camera settings
Select camera
Filtering order(Image0)
Filtering(Image0)
BGS levels(Image0)
Filtering order(Image1)
Filtering(Image1)
BGS levels(Image1)
Frame/Field
The judgement display, all measurement values, and the measurement region
will be displayed in the color set under OK color or NG color, depending on the
measurement result.
OK color
OK 67ms
Image 0 freeze
OK color (region line color)
The figure color is the color for figures or characters displayed on the screen
using the results display-related processing items.
Normal
(Screen message color)
Background
(Menu box color)
NG color (square color)
0.Scn 0 MON
1.Fine matching
Judge :NG
Quantity : 1
Area :12
Gravity X :290.000
Gravity Y :280.000
Image 0 freeze
OK color NG color (region line color)
Section 5-3
NG 67ms
5-(13)