Starting Measurement; Entering Run Mode - Omron F250-UME Software Manual

Starting Measurement

3-2 Starting Measurement
3-2-1

Entering Run Mode

CHECK
The key allocations for the Console Keys can be changed from MON and RUN
screens. In the following explanation, it is assumed that the key allocations are
at the default settings. If they are not, adapt the procedure accordingly. Refer
to
1. Move the cursor to MON and press the ENT Key.
0.Scn 0
2. Select RUN.
Run Mode will be entered.
.
OK 67ms
MON
SET
MON
RUN
SYS
TOOL
SAVE
Image 0 freeze
Section 3-2
3-(5)