Display Figure - Omron F250-UME Software Manual

Display Figure

2-48 Display Figure
CHECK
CHECK
CHECK
CHECK
SeeAlso
Operational Flow
STEP 1: Setting Display Conditions
The Display Figure processing item is used to display figures (lines, boxes, cir-
cles, and arcs) at fixed positions on the screens in Run and Monitor Modes.
Example: Displaying Lines To Indicate the Center of the Screen as a Guide to
the Position of the Measurement Object
Use this processing item to display lines, boxes, circles, and arcs at a fixed
position on screens in Run and Monitor Modes.
The data set here will be enabled when None or Positions is selected under
System/Display/Display settings/Display results.
Even when the display image is set to be displayed as a reduced image, the
reduced figure is displayed in the corresponding position.
The figure will be displayed if it is registered to the unit, regardless of whether
or not Display figure is executed using the branching control processing items.
Select Display Line, Display Box, Display Circle, or Display Cursor under dis-
playing results to display figures using measurement results.
Refer to
Set the conditions for display.
Conditions
Color :
End
Always display lines
0.Label RUN
Image 0 freeze
STEP 1
Draw figure.
Set display
conditions.
Figure color
Figure 0 to Figure 6 (Figure 0)
Figure0
Refer to
Section 2-48
OK 45ms
STEP 2
.
.
2-48-(1)