Normal Data - Omron F250-UME Software Manual

Normal Data

2-42 Normal Data
2-42-(1)
Use the Normal Data processing item to output data to Programmable Con-
trollers, personal computers, and other external devices via a serial interface.
Measurement values and calculation results can be output.
Programmable Controller
Personal computer
Data is output only when measurement is performed in Run Mode. Data will
not be output if measurement is executed in Monitor Mode. The overall judge-
ment for the set processing items will be output to the parallel interface OR
signal, regardless of whether or not the Normal Data processing item is set.
Section 2-42
Serial interface