Omron F250-UME Software Manual page 132

Binary Position Compensation
CHECK
2-5-(13)
The screen for selecting the detection method will be displayed.
2. Select Gravity and axis.
The initial screen for gravity and axis will be displayed.
3. Select Binary.
The settings screen for binary levels will be displayed.
Binary level
:Move
Auto
The Controller
automatically sets the
binary level.
4. Move the cursor to the upper limit and use the Left and Right Keys to
change the value.
Right Key:
SHIFT+Right Keys: Increases the value 10 times faster.
Left Key:
SHIFT+Left Keys:
Up and Down Keys: Switches between setting items.
5. Use the same method to change the lower value.
Set the upper and lower limits to make the measurement object white.
Gravity and area
Gravity and axis
Binary
Region
Reference registration
Judgement conditions
Detailed
Clear
Lower limit
Upper[255]
Lower[128]
Reverse
:Change
Reverse
Reverses dark and clear
in the display.
Increases the lowest digit by one.
Decreases the lowest digit by one.
Decreases the value 10 times faster.
Make the measurement object white.
Binary level
Upper[255]
Lower[128]
Reverse
:Move :Change
Section 2-5
Upper limit
Auto
OK
Auto
OK