Table of Contents
Advertisement
EC Position Compensation
2-6-4
Setting Displacement Direction
Measurement Objects Not On An Angle (Example: Region 0 Set to Box)
Measurement Objects On An Angle (Example: Region 0 Set to Cross Point)
For Precision Position Compensation Using Measurement Object Angles (Example: Settings
Made for Both Region 0 and Region 1)
The direction function is used to select which region's measurement results
will be used as the basis for position displacement compensation in the X, Y,
and
(rotation) directions
1.
Select Direction.
1.EC pos. comp
The Direction Settings Screen will be displayed.
Direction
Direction X
Direction Y
Direction
Direction X
Direction Y
Direction
Direction X
Direction Y
Direction
Measurement image
Extract edges
Position compensation 0
Position compensation 1
Direction
Direction X
:
Region 0
Direction Y
:
Region 0
Direction
:
None
End
Section 2-6
:
Region 0
:
Region 0
:
None
End
:
Region 0
:
Region 0
:
Region 0
End
:
Midpoint
:
Midpoint
:
Relative angle
End
2-6-(35)
Advertisement
Chapters
Table of Contents
