Omron F250-UME Software Manual page 113

Filtering Again
2-4-1 Direction
Camera
settings
Camera Image buffer
0 (for Camera 0)
Image buffer
Camera
(for Camera 1)
1
Image buffer
Camera
(for Camera 2)
2
Image buffer
Camera
(for Camera 3)
3
0.Scn 0=SET=
0.Camera image
1.Filtering again
2.Fine matching
3.
Filtering
1
Filtering 1/ Strong
smoothing set under 0.
Camera image.
Images can be sent from Image 0 to Image 1 or from Image 1 to Image 0 to
add filtering to the image when it is transferred. The direction function is used
to select the direction of the transfer. (Which image is used for measurement,
Image 0 or Image 1, depends on the processing item, so select the proper
transfer direction for the processing item.)
First filtering
Camera
selection
First filtering
Example: To execute smoothing twice before measurement.
1. Filtering again.
Image 0
Second
filtering
Image 1
Filtering again
Image 0
Filtering
0
Second
filtering
Image 1
Filtering
1
Image for which smoothing has been
performed twice is stored and this image used
for measurement under 2. Fine matching.
Set Filtering/Strong smoothing
Set Direction/Image 1
The image on which smoothing has been
performed will be stored.
Section 2-4
Set second filtering
under Filtering again.
“
0.
2-4-(2)