Omron F250-UME Software Manual page 567

Lot Number OCV 1
Extraction region
Extracting region
In the following descriptions, the asterisk (*) indicates the default setting.
End Images
Select whether to leave or remove the area adjacent to the extracting region.
(Leave*, Erase (horizontal), Erase (vertical)
For Measurement Objects that Move Vertically
Select Erase (vertical).
If edge has shifted downwards
For Measurement Objects that Move Horizontally
Select Erase (horizontal).
If the edge has shifted to the right
For Measurement Objects That May Move Vertically or Horizontally
Only edges that overlap either vertically or horizontally can be removed. If the
edges overlap both vertically and horizontally, the numbers cannot be
extracted correctly. If the possibility exists of overlap in both directions, adjust
the position and size of the extracting region so that only the numbers to be
extracted fall within the extracting region.
Incorrect
Edge section that overlaps
extracting region is removed
before extraction is executed.
Edge section that overlaps
extracting region is removed
before extraction is executed.
Adjust size of extracting region.
Correct
Section 2-24
2-24-(14)