Omron F250-UME Software Manual page 606

Label Data
2-26-5 Measurement Screens
SeeAlso
CHECK
2-26-(8)
Detailed measurement values can be displayed on the screen in Monitor and
Run modes. These values are useful when adjusting measurement conditions.
This section describes what kind of information can be displayed for label
data.
Refer to
Run modes.
Press the SHIFT+ESC Keys on the Run Screen to access the following screen
and change Display results to Details.
0.Scn 0
Use the Up or Down Key to change to the unit for which label data is set and
the following detailed screens will be displayed.
0.Scn 0 RUN
2.Label data
Judge : OK
Label no. : 2
Area : 561
Gravity X : 450.00
Gravity Y : 250.00
RUN
Image status
:
Freeze(Before scroll)
Display image
: Image0
Image size
: All
Display results
: Details
End
OK 45ms
Judgement result for this Unit
A circle is displayed at the center of
gravity of the specified label for an OK
judgement; an ex, for a NG judgement.
Display Image
Binary image for Labeling
reference unit
Gray image for Fine Matching
or EC Defect reference unit
Section 2-26
for details on Monitor and