Omron F250-UME Software Manual page 404

EC Positioning
STEP 4: Registering Reference Positions
SeeAlso
2-16-(21)
1. Select Search region.
The screen for drawing search regions will be displayed.
Search region
2. Draw a rectangular search region.
Specify the upper left and lower right coordinates.
Up/Down/Left/Right Keys:
ENT Key:
When the bottom right coordinates have been set, the screen in (1.) will re-
turn.
Register reference positions here to detect position displacement. Positions
can be inspected if the difference between the reference position and the mea-
surement position is obtained from a calculation.
Refer to
1. Select Reference registration.
Region0(Cross point)
Region0(Cross point)
Measurement conditions
Line conditions
Search region
Reference registration
Clear
Move the cursor.
Confirms the settings.
for an outline.
Measurement conditions
Line conditions
Search region
Reference registration
Clear
Section 2-16
251,365