Omron F250-UME Software Manual page 248

Detecting Binary Defects
CHECK
CHECK
2-12-(5)
3. Move the cursor to the upper limit and use the Left and Right Keys to
change the value.
Right Key:
SHIFT+Right Keys: Increases the value 10 times faster.
Left Key:
SHIFT+Left Keys:
Up and Down Keys: Switches between setting items.
4. Use the same method to change the lower value.
Set the upper and lower limits to make the measurement object white.
5. Select OK.
The settings will be registered and the screen in (1.) will return.
It is also possible to set the binary level so that measurement is performed
only for an intermediate density range.
Increases the lowest digit by one.
Decreases the lowest digit by one.
Decreases the value 10 times faster.
Make the measurement object white.
Binary level
Upper[255]
Lower[128]
Reverse
:Move :Change
Section 2-12
Auto
OK