EC Circle Count
CHECK
SeeAlso
2-19-(5)
The greater the mask size, the more the variations in surrounding pixels can
be absorbed. Select 5
This function is even more effective if smoothing is used.
Refer to
ing can be set to be executed twice).
1.
Select Extract edges.
1.EC circle count
The screen for setting edge extraction levels will be displayed.
Extract edges
2.
Set the upper and lower limits.
Right Key:
SHIFT+Right Keys: Increases the value 10 times faster.
Left Key:
SHIFT+Left Keys:
Up and Down Keys: Switches between setting items.
3.
Select the mask size.
4.
Press the ENT Key.
The settings will be registered and the screen in (1.) will return.
5 to ignore uneven edges.
and
Measurement image
Extract edges
Measurement conditions
Inspected region
Candidate radius
Judgement conditions
Detailed conditions
Coordinate mode
Lower limit
Upper[255]
Lower[100]
Mask:5x5
:Change ENT:OK ESC:Back
Increases the lowest digit by one.
Decreases the lowest digit by one.
Decreases the value 10 times faster.
Section 2-19
(where smooth-
Upper limit
OK