Omron F250-UME Software Manual page 734

Table of Contents

Advertisement

Display Item
STEP 3: Setting Display Position
2-46-(3)
The Conditions Settings Screen will be displayed.
2.
Make the settings for each item.
3.
Select End.
The settings will be registered and the screen in (1.) will return.
Set the position for character display. The size of the display region shown on
the screen is the same as the actual size when the item is displayed. Use this
as a reference for deciding positions.
Care must be taken because characters in any part of the display region that
protrudes past the right edge of the screen will not be displayed.
1.
Select Position.
4.Display item
The cursor for setting position and the display region will be displayed.
Position
2.
Use the Up/Down and Right/Left Keys to move the display region.
3.
Press the ENT Key to set the position.
The settings will be registered and the screen in (1.) will return.
Conditions
Font size
: Normal
Color
: Normal
Reverse
:
OFF
End
Select item
Conditions
Position
Display region
Section 2-46
(10,13)

Advertisement

Table of Contents
loading

Table of Contents