Omron F250-UME Software Manual page 724

Display Measurement
SeeAlso
2-44-(2)
The setting selections will be displayed.
4.Display measure
2. Select Measurement.
The Measurement Settings Screen will be displayed.
Measurement
Measurement:
ENT:Change
3. Move the cursor to the square brackets for the measurement data and
press the ENT Key.
A list of setting items will be displayed.
Measurement
ENT:Select
4. Select the items to be set and set the expressions.
Refer to
5. Once the expression has been set, select OK.
The expression will be set and the screen in (2.) will return.
Measurement
Measurement: 0.000
ENT:Change
Measurement
Conditions
Position
Unit ABS SIN
MOD COS
MAX ANGL
MIN ATAN
SQRT DIST
Const
DEL BS
.
U2.R00X-U2.R00SX
Section 2-44
AND
OR
NOT
OK