Omron F250-UME Software Manual page 382

EC Defect
CHECK
Defect Position
Defect Width and Length
Individual Region Display
SeeAlso
2-15-(49)
If the font size is set to small, the list of positions and defect area and defect
position and defect width and length screens will be listed together.
If the font size is set to normal, the defect area, defect position, and defect
width and length screens will be displayed consecutively.
A list of defect positions for each region will be displayed.
0.Scn 0 RUN
1.EC defect
Pos.X Pos.Y
0. 98.351 212.356
1.
2.
3.
4.
5.
6.
7.
A list of defect widths and lengths for each region will be displayed.
This screen will be displayed even if defect inspection has not been set.
0.Scn 0 RUN
1.EC defect
Width Length
0. 2.213 129.345
1.
2.
3.
4.
5.
6.
7.
More detailed measurement results are displayed for each region.
Press the SHIFT+ Right or Left Keys to display the set regions in order.
When defect display is set to Detail, the measurement values will be displayed
followed by the image minus the measurement values.
Refer to page 2-15-(37) and page 2-15-(42).
NG 45ms
NG regions will be highlighted.
Region number
NG 45ms
NG regions will be highlighted.
Region number
Section 2-15