Omron F250-UME Software Manual page 412

EC Positioning
2-16-3-4 Multi-points
STEP 1: Setting Measurement Conditions
Measurement conditions
Note 1 Target color
Specifying angle
Range of angle
Note 2
Limits of angle
Specifying length
Length 1
Note 3
Limits of length 1
Length 2
2-16-(29)
1. Select Reference registration.
Position0(Box)
The Controller will search for the box in the displayed image and a display
cursor will appear at that position.
Reference registration
ENT:Set
2. Press the Up/Down and Right/Left Keys to move the cursor to change the
position.
3. Press the ENT Key to save the setting.
The setting will be registered and the screen in (1.) will return.
1
Set mea-
surement
conditions.
Set the conditions for searching for the positioning mark.
: Black
:
OFF
:
[ 90]
: [10]
: OFF
:
[100]
:
[ 80:120]%
: [ 50]
End
Measurement conditions
Line conditions
Search region
Box size
Reference registration
Clear
Search region
248,152
:Move
(As required)
2 3
Set condi-
Set search
tions for
region.
obtaining
lines.
Limits of length 2
Note 3
Sorting method
Note 4
Defined side of θ
Note 5
Section 2-16
Reference position
(As required)
4
Register
reference
position.
: [ 80:120]%
:
X Ascending order
:
Midline of corner