Omron F250-UME Software Manual page 689

Memory Card Data
Item
Output drive Select the number of the drive to which the Memory Card is
mounted.
Output file Set the name of the file that will store the measurement results.
Data will not be output if no file name is set.
1. Select Memory card data.
ENT:Set SFT+ESC:Edit
The list of set expressions will be displayed.
4.Memory card data
2. Select Conditions.
The Conditions Settings Screen will be displayed.
Conditions
3. Change the settings for each item.
4. Move the cursor to the square brackets for the output file name and press
the ENT Key.
Use the Down Key to scroll the cursor and display the output file name.
0.Scn 0=SET=
0.Camera image
1.Binary pos. comp
2.Edge position
3.Edge position
4.Memory card data
5.
Conditions
0.
1.
2.
3.
4.
5.
6.
7.
SFT+ESC:Edit
Output form :
Digits of integer : [8]
Digits of decimal : [3]
Minus :
Field separator : Comma
Record separator : CR+LF
0 suppress :
Output drive :
End
Section 2-38
Details
ASCII
-
OFF
C1
2-38-(3)