Checking I/O Status With External Devices; Serial Interface - Omron F250-UME Software Manual

Checking I/O Status with External Devices

4-5 Checking I/O Status with External Devices
4-5-1

Serial Interface

4-(28)
Use the I/O monitor function to check the communications status via serial or
parallel interfaces. Wiring and communications settings can be checked to see
if they are correct.
The communications status via the serial interface can be checked.
1. Display the Basic Screen for Monitor Mode or Run Mode.
0.Scn 0
2. Move the cursor to MON (or RUN) and press the ENT Key.
The mode selections will be displayed.
0.Scn 0
3. Select TOOL.
The tool selections will be displayed.
Down Key: Scrolls through the menu.
TOOL
4. Select I/O monitor.
The interface selections will be displayed.
MON
Image 0 freeze
MON
SET
MON
RUN
SYS
TOOL
SAVE
System + Scn Group
Image data
Memory card
Clear images
Clear measurement
Line brightness
I/O monitor
Back up Flash memory
Serial
Parallel
Section 4-5
---- ---ms
---- ---ms