Table of Contents
Advertisement
Detecting Binary Defects
STEP 6: Changing Pixel Skipping
2-12-(35)
1.
Select Judgement conditions.
Region0(Area(var.box))
The Judgement Conditions Settings Screen will be displayed.
Judgement conditions
2.
Change the settings.
3.
Select End.
The settings will be registered and the screen in (1.) will return.
To shorten measurement processing time, change the number of pixels to be
skipped. The greater the skipping setting, the shorter the processing time.
However, the accuracy of the measurement will decrease.
Once the skipping setting has been changed, perform a measurement and
confirm that measurement can be performed correctly.
Skipping X and Skipping Y
Set how many pixels to skip in the measurement region during measurement.
The default setting is 1, which means that all of the measurement region will
be measured.
Binary
Measurement conditions
Left edge
Upper edge
Right edge
Lower edge
Reference registration
Judgement conditions
Area
: 2035.000
[
2000.000 : 247808.000]
Gravity X : 180.000
[
0.000 :
511.000]
Gravity Y :
250.000
[
0.000:
483.000]
End
Skipping X
Pixel
Skipping Y
Section 2-12
Advertisement
Chapters
Table of Contents
